15kg and 30kg Silver Ingot Casting Machine

How silver ingot casting machines work: a comparison of 15kg and 30kg automatic models, key parameters and selection tips for refineries.

15kg and 30kg Silver Ingot Casting Machine

Introduction to silver ingot casting machine and ingot casting machine models

Design Capacity15kg3.3~4 tons/24 hours (15~18 heats), hot furnace status, silver powder material
30kg4~4.8 tons/24 hours (15~18 heats), hot furnace status, silver powder material
Silver Ingot Weight15±1kg/ingot, 30kg/ingot
Hydraulic Pressure12MPaControl SystemPLC Control
Equipment WeightTotal weight approx. 30,000kg, heaviest device (mold car) approx. 5,000kg
Overall DimensionsComplete machine: 12000×9300×3200mm, largest part (mold car): 10000×1000×2700mm
    1. Model One: Melting and Casting Type (Dual-Purpose Machine)
        • Utilizes medium frequency furnace for melting, capable of casting 15kg vertical molds and 30kg flat molds.
          • Features automatic mold release, robotic arm for fetching, and automatic post-processing (water cooling, trimming silver heads, grinding, polishing, marking), and finally palletizing.
            • Floor space required: 15 meters in length, 10 meters in width, totaling 150 square meters.
              • Investment: RMB 4 million in total, excluding construction costs.
                • Capacity: 1.5-2 tons per 8 hours.
                  • Mold material: Cast iron.
                    • Mold changing method: Automatic mold change by cart.
                      1. Model Two: Tunnel-Type Static Ingot Casting
                          • Silver powder goes through granulation and drying first, then automatically weighed and added to the mold. It uses tunnel-type medium frequency induction melting and casting, with cooling performed within the tunnel.
                            • The mold is removed from the furnace when its temperature drops below 400°C, followed by demolding and post-processing.
                              • Floor space required: Including granulation, ingot casting, and post-processing, it requires 20 meters in length, 20 meters in width, totaling 400 square meters.
                                • Investment: RMB 6 million in total, including granulation, ingot casting, and post-processing, excluding construction costs.
                                  • Capacity: 1.0-1.5 tons per 8 hours.
                                    • Mold changing method: Manual mold change.

                                    Model Three: Alternating Left-Right Static Ingot Casting

                                      • Silver powder goes through granulation and drying, then automatically weighed and added to the molds in a dual-position ingot casting furnace using medium frequency induction melting.
                                        • Dual molds alternate between melting processes inside the furnace and are cooled via water jackets; demolding occurs when the mold temperature exceeds 400°C.
                                          • Post-casting water cooling and processing can be done either inside the furnace or after removal.
                                            • Floor space required: 24 meters in length, 10 meters in width, totaling 240 square meters (length can be adjusted based on site layout).
                                              • Investment: RMB 7 million in total, including granulation, ingot casting, and post-processing, excluding construction costs.
                                                • Capacity: 1.4 tons per 8 hours.
                                                  • Mold changing method: Manual mold change

                                                  Related equipment

                                                  If the plant is casting anode plates for its own electrolytic refining rather than delivery ingots, the 45kg silver anode plate casting machine is the equivalent machine on a vertical mold disc — it covers 9–45 kg plates at 60–120 pieces per hour. For the 30 kg automatic line described above, the 30kg silver ingot casting machine page lists the standard configuration and options, and the gold and silver refining equipment overview puts casting, electrolysis and metal recovery in one circuit.

                                                  Model selection follows the product, not the budget: vertical molds suit bars that go straight to delivery, horizontal molds suit plants that re-melt or roll the ingots, and anode plates follow the cell design of the refinery.

                                                  Notice:

                                                  • We only provide mineral processing equipment and solutions; not buy and sell minerals/ ores/ materials.
                                                  • We do not recruit, don’t offer jobs, and are not interested in investments or partnerships.
                                                  • We value your privacy and keep your information safe.

Tell us what you are casting

Send the metal, the weight of the piece and the output you need. We reply with a machine configuration and a price range within one working day.

Request a quotation